(mine)

http://www.ebay.com/itm/130911597255?ite...m=&vxp=mtr

Hey all....

have a 4 wheel power drum brake system....

I have all new stainless brake lines and wheel cylinders....

the proportioning valve and master cylinder are original to the car when I purchased it...

I hooked everything up, and bled the front brakes....then I moved to the rear....everything was fine until the rear of the master cylinder began leaking and fluid ran down between the master cylinder and brake booster....

I purchased a new master cylinder, and installed it....

today I filled it up and began to bleed the brakes....I bled the front and it appeared to go fine....

I tried to do the rear brakes and there is no fluid coming out of either side....
I disconnected the ss line from the rear flexible line.....no fluid in there either(other than a few drops).

I moved to the proportioning valve, and loosened the line that goes into the top of it from the master cylinder....a hiss and some fluid....

I tried the front brake line ports....got fluid to come out....
I tried the rear brake line ports, and nothing....not a drop

any ideas? I am thinking it's either a bad master cylinder, or there is a blockage in the forward line that sends fluid to the rear brakes....

Help...please!

Mark

1766 Found this date on trunk mat. Hopefully I can save it

Attached Files

Thumbnail(s)
   

Has any one fabbed up this conversion or know of a kit to do it? One mod I plan to do is an oversized stick shift instead of the column. Much lke the one in this pic!1765 Wow my title is all jacked! Column!

Attached Files

Thumbnail(s)
   

Why cant I post a reply to parts for sale ? BooBoo

so I'm new here and didn't really no where to put this. I'm looking at buying a coronet r/t project car and seller says it's the original 440 but there's no fender tag, so I don't no how he can say that. he's not the original owner and knows basically no history on the car. the vin number ws23L71254342. does anyone no resources that will tell me what the fender tag is?
thanks

17501751175317561757Found this 72 Coronet in N.C. last year. When I got it, it looked like it sat in the dirt for a few years17521753175317541755 Will post more pics later. For some reason I can only post a few at a time

Attached Files

Thumbnail(s)
                               

Hey all....

I am shining up my chrome trim for my side windows and noticed a type of insulation/felt doohicky that is between the body just under the drip rail and the trim.....

not sure what it's called, and probably wasn't clear....but that's what I need....

any ideas?

thanks,

Mark

Hey all,

am trying to rebuild my throttle linkage and am missing the stud and cotterpin that links the carb/gas pedal cable/kickdown linkage...

does anyone have a pix of a stock setup for me to look at.....I think that's all I am missing....

thanks,

Mark

http://www.masondixondragway.com/Special...Mopar2.pdf

Mopar day at Mason Dixon Dragway in Boonesboro, Maryland (near Hagerstown and I-81 and I-70) is on Sunday May 19, 2013.
There is a show, vendors and racing.
If the weather is good, I plan to take my 67 Coronet convertible.