67 temp sending unit wire

[BooBoo]

The engine temp sending unit on my 67 dosnt have a wire going to it . Where about is the wire located at ? What bunch of wires is it in with ? Thanks . BooBoo

[67r/t4speeder]

Usually wrapped with wires going along right side to alternator

[ws27]

I'll add that it will be a single one separate from the alternator, it has/had cloth loom, and a 90 degree boot to plug into the sensor. If you need the color, let us know.

[Hibbing_Coronet_500]

The color is Violet. Should be hanging around with the green field wire to the alt..

[BooBoo]

Ok , we're getting close . There is a violet wire cut and a brown wire cut near the alt . There is also a violet with a white stripe that has a 90* boot on it coming from the rely on the fire wall under the big plug with all the wires coming from it on the drivers side . It is wraped around other wires to keep it out of the way . Why would that be unplugged ? Thanks . BooBoo

[65rbdodge]

the one on the drivers side could go to the proportioning valve for the in dash brake light(when your master cyl. goes empty or bad)?

[BooBoo]

I agree the purple one is for the tenp and the one one the other side is for the M/C since there is no wire on it . Also the brown one i talked about must be for the washer jug since it is completly missing . Thanks everyone for your help .