07-20-21, 11:45 PM
I need to start work on the front end in stages. What would be the first step? Upper and Lower ball joints? Thanks.
|
1967 Front End Work
|
07-21-21, 01:21 AM
Id go lower ball joints, strut bushings and lower control arm bushings first. Then second upper ball joints and upper control arm bushings.
If a man speaks while in his garage and his wife does not hear it, is he still wrong?
07-21-21, 10:34 AM
Have you had an inspection done?
Jeff is right start down low and work your way up. Only replace it if needed though.
The Idaho Andy
OL Blue is scared of Max 
07-21-21, 11:20 PM
No inspection, just wobble and tire scalloping. Just had a tire balance and same thing still happening. This very helpful. Thank you.
07-22-21, 08:08 AM
Just don't buy one of those all in one kits from Kanters/PST/Just Suspension.. cheaply made Chinese/Taiwanese parts that last as long as old fuel line and ethanol. Moog parts are still available, I've got a list of part numbers on the site to use.
If you're scalloping I'd look at shocks as well..
I love Mopars so much I'm date coding the skid marks in my underwear.
07-23-21, 12:10 PM
stonehengeheels Wrote:Where would I find that list 67440? https://www.dodgecoronet.com/coronet/sho...sion-Parts
07-24-21, 10:55 AM
Mopars & Missiles Wrote:https://www.dodgecoronet.com/coronet/sho...sion-Parts Thanks!! If your local auto parts store can't get them, believe it or not Amazon used to carry them.
I love Mopars so much I'm date coding the skid marks in my underwear.
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| 1967 Coronet 'Restoration' | Piper | 29 | 203 |
07-27-24, 05:12 PM Last Post: juan a. |
|
| Front End Alignment Shop for 1967 Coronet | 440net | 2 | 13 |
05-29-24, 04:14 PM Last Post: 440net |
|
| 1967 Coronet Hemi Value | strangleholdracn | 7 | 1,573 |
04-02-22, 08:03 PM Last Post: thebankerstoy |
|
| 1967 Coronet rebuild thread. | Piper | 25 | 25,405 |
11-11-19, 02:20 PM Last Post: Piper |
|
| Happy Birthday 1967 Coronet. | Hibbing_Coronet_500 | 9 | 5,225 |
04-16-17, 12:48 PM Last Post: Racer Brown |
|
| Guess Valvoline Racing Oil don't work........... | markz | 3 | 2,888 |
10-23-15, 07:16 PM Last Post: markz |
|
| 1967 coronet front fiberglass bumper | Stage III | 2 | 3,462 |
07-01-15, 09:03 PM Last Post: markz |
|
| 1967 R/T rear brake drum | hemibro | 12 | 8,046 |
11-26-14, 09:47 PM Last Post: markz |
|
| front end/ engine swap question...... | bike_guy123 | 7 | 4,661 |
06-05-14, 10:55 PM Last Post: honcho |
|
| Got the front end in! | Warhawkfight34 | 6 | 3,696 |
05-29-14, 08:11 AM Last Post: Warhawkfight34 |
|
| Users browsing this thread: |
| 2 Guest(s) |