07-20-21, 11:45 PM
07-21-21, 01:21 AM
Id go lower ball joints, strut bushings and lower control arm bushings first. Then second upper ball joints and upper control arm bushings.
07-21-21, 10:34 AM
Have you had an inspection done?
Jeff is right start down low and work your way up. Only replace it if needed though.
Jeff is right start down low and work your way up. Only replace it if needed though.
07-21-21, 11:20 PM
No inspection, just wobble and tire scalloping. Just had a tire balance and same thing still happening. This very helpful. Thank you.
07-22-21, 08:08 AM
Just don't buy one of those all in one kits from Kanters/PST/Just Suspension.. cheaply made Chinese/Taiwanese parts that last as long as old fuel line and ethanol. Moog parts are still available, I've got a list of part numbers on the site to use.
If you're scalloping I'd look at shocks as well..
If you're scalloping I'd look at shocks as well..
07-22-21, 09:42 PM
Where would I find that list 67440?
07-23-21, 12:10 PM
stonehengeheels Wrote:Where would I find that list 67440?
https://www.dodgecoronet.com/coronet/sho...sion-Parts
07-24-21, 10:55 AM
Mopars & Missiles Wrote:https://www.dodgecoronet.com/coronet/sho...sion-Parts
Thanks!! If your local auto parts store can't get them, believe it or not Amazon used to carry them.