Race Car new motor build has begun.........

[markz]

Rebuilding the motor in my race car. Gonna tweak the hp some.

Going from 528 to 572 ci. New heads, intake, cam, crank, rods, pistons, etc. The heads have been ordered. B1 MC heads with T&D individual rocker pair rockers. Working a deal now for some unused custom 2 1/8 to 2 1/4 step SS headers. The crank will be ordered soon. Wanted Callies but don't think they are available. If not probably a Molnar 4.5 inch stroke crank. Bore is also 4.5 inch. Its a 2001 megablock.

It will be a handful. The aerodynamic brick should go 8.90's and maybe even 8.80's with the new combo around 150 mph............

[theman440]

Wow!

[Joe mama]

Sounds like fun!

[65rbdodge]

Sounds like it’s going to be mean

[Irores]

I like that. Keep us posted on your progress into the 8 second club.

Ragnar in Iceland

[markz]

Well the old motor has seen its final runs. Last run was 9.781 spinning the tires in the heat - it was hot. Motor getting pulled next week.

[65rbdodge]

Good luck with the new motor, sounds like it go to be mean

[markz]

Parts are starting to filter in. Boy the rocker assembly is heavy!

11919119201192111922

[67r/t4speeder]

Big gulp intake

[markz]

Big gulp intake

Gonna feed that gulping with this! Its so purty!

Gary Williams carb. 1320 CFM wet - approx 1400 - 1450 dry.

11943