Reproduction Parts On Ebay

[thebankerstoy]

Some nice reproduction parts that folks might need for their Coronets.

Richard

New Mopar 1966 Coronet Hood Lip Molding Trim

Ebay auction link: http://www.ebay.com/itm/401068429815?_tr...EBIDX%3AIT



New 1967-74 A-Body and 1966-70 B-Body Bulk Head Connector Seal Kit

Ebay auction link: http://www.ebay.com/itm/400999723635?_tr...EBIDX%3AIT



[B]New 1967 B-Body Lower Steering Column Cover[/B]

Ebay auction link: http://www.ebay.com/itm/161966921205?_tr...EBIDX%3AIT


[B]New Mopar Federal Power Steering Pump Brackets For 1967-72 Big Block And Hemi Applications[/B]

Ebay auction link: http://www.ebay.com/itm/181870276743?_tr...EBIDX%3AIT




[B]New Mopar 1964-69 TRW Power Steering Pump Brackets For Big Block[/B]

Ebay auction link: http://www.ebay.com/itm/400987627885?_tr...EBIDX%3AIT




[B]New Mopar 1967-68 Big Block A/C Alternator Bracket Kit[/B]

Ebay auction link: http://www.ebay.com/itm/181852367478?_tr...EBIDX%3AIT

[ws27]

Thank you Richard, good to know. I didn't know they made the steering column cover.

[Racer Brown]

Thank you Richard, good to know. I didn't know they made the steering column cover.

I had seen somewhere that someone was repoping those.

[thebankerstoy]

Hello Rich and Steve,

The same Ebay seller (dodgeboy) that sells the 1967 B-Body steering column shaft covers shown above also sells the reproduction chrome trim "U" piece for the 1967 B-Body cars that fits around the top side of the steering column shaft where it passes through the dashboard as shown below. They don't have any listed on Ebay at this time, but if anybody needs one I'm sure if contacted they could sell you one.

In case anybody is wondering, these steering column shaft covers and chrome trim parts are specific to the 1967 B-Body cars and are NOT interchangeable on the 1966 B-Body cars!

This is due to the 1967 models being the first model year to use the slightly larger diameter collapsible steering column assemblies while the 1966 models were the last model year to use the slightly smaller diameter non-collapsible steering column assemblies. This change meant that Chrysler also had to make modifications to the metal dashboard shell opening where the steering column shaft assembly passes through the dashboard shell and that meant that the covers and trim pieces also had to be completely redesigned for the 1967 models.

Richard

[ws27]

Be careful, there are two different trim pieces for the 67s. One for sedans, and one for hart tops/verts. The difference is the overall length because sedans don't have lower dash chrome.

[thebankerstoy]

I agree and thank you Rich. Below are the part numbers and applications for the two different steering column trim mouldings for the various 1967 Dodge and Plymouth B-Body models.

The reproduction steering column trim moulding being sold and shown in this thread is a replacement for the original factory part number 2822 794 shown below.

1967 Factory Parts Book section number: 23-33-86
Part number: 2822 794
Part description: moulding, instrument panel, steering column
Applications: 1967 Dodge Coronet: 2 door hardtop and convertible coupe: Coronet 440 (W-H) trim level models
Applications: 1967 Dodge Coronet: 2 door hardtop and convertible coupe: Coronet 500 and Coronet R/T (W-P) trim level models
Applications: 1967 Charger models, all
Applications: 1967 Plymouth Belvedere: 2 door hardtop and convertible coupe: Belvedere II (R-H) trim level models
Applications: 1967 Plymouth Satellite and GTX: 2 door hardtop and convertible coupe: Satellite and GTX (R-P) trim level models
Number used per car: 1


1967 Factory Parts Book section number: 23-33-86
Part number: 2822 795
Part description: moulding, instrument panel, steering column
Applications: 1967 Dodge Coronet: Police (W-K) models, all
Applications: 1967 Dodge Coronet: Taxi (W-T) models, all
Applications: 1967 Dodge Coronet: base Coronet (W-E ) models, all
Applications: 1967 Dodge Coronet: Coronet Deluxe (W-L) models, all
Applications: 1967 Dodge Coronet: Coronet 440 (W-H ) 4 door sedan models, all
Applications: 1967 Plymouth Belvedere: Police (R-K) models, all
Applications: 1967 Plymouth Belvedere: Taxi (R-T) models, all
Applications: 1967 Plymouth Belvedere: base Belvedere (R-E) models, all
Applications: 1967 Plymouth Belvedere: Belvedere I (R-L) models, all
Number used per car: 1

[67440Dodge]

Also,

66 is chromed metal

67 is vacuum chromed plastic

[67r/t4speeder]

Also,

66 is chromed metal

67 is vacuum chromed plastic

Then I want the light weight plastic one , so when we race it'll make up for my belly
Ol blue going down !!!!

[67440Dodge]

Then I want the light weight plastic one , so when we race it'll make up for my belly
Ol blue going down !!!!

7906]

[roadworthy]

must be nice to have a source for reproduced parts...