Login

TekHousE · 07-25-15, 05:34 AM

OK, I checked the Service manual, nothing mentioned about how to get these door lock knobs off.

I have new ones and they do not seem to have a thread, so does anyone know the procedure?

markz · 07-25-15, 10:32 AM

They unscrew. Pull up as you unscrew them.

I have seen new ones with no thread. Not sure if you just thread them on and make the threads or if there is some other plan.

TekHousE · 07-25-15, 06:35 PM

Thanks. SO the rods must be self tapping..Thanks for the info..I will try tomorrow.

thebankerstoy · 08-10-15, 02:11 PM

Hello Zoran,

How did your new door lock knobs turn out?

Richard

TekHousE · 09-02-15, 01:57 PM

Perfect Richard..I was a little apprehensive at first, the rods are self tapping, so getting old ones off takes some effort..Feels like you are going to break something..Luckily I didn't. Smile

thebankerstoy · 09-02-15, 07:50 PM

Good to hear that they turned out well, one less thing to worry about! Smile

Richard

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	1965 Coronet 4 speed lubrication confusion	finz68	15	34,680	11-01-23, 06:33 PM Last Post: Krooser
	1968 Coronet 440 HT rear inside lower trim - Having difficulty	revel68	1	15,279	06-26-19, 12:04 AM Last Post: revel68
	67 Coronet Diff measurements	RT K_line	4	17,937	01-23-18, 04:30 PM Last Post: 67r/t4speeder
	1966 coronet 2 door windshield	66bbcoronet	7	6,505	05-02-17, 03:00 AM Last Post: dag1969
	Worn Hinges and Door Misalignment	Hibbing_Coronet_500	5	4,793	01-04-17, 09:24 PM Last Post: 67-500
	coronet 1968 camber problem	spezia	2	3,954	10-02-16, 10:29 AM Last Post: R/T XTC
	67 Coronet R/T Sloppy auto column shifter HELP	Just Wheels	2	3,759	07-15-16, 11:51 PM Last Post: Just Wheels
	1949 dodge coronet new guy	wafo63	9	6,221	04-12-16, 06:45 PM Last Post: wafo63
	wiper switch for 67 coronet	Honez	15	7,478	03-16-16, 05:01 AM Last Post: JohnS
	Removal of 383 4 barrel badges on 67 Coronet?	TekHousE	4	3,467	10-11-15, 07:08 AM Last Post: TekHousE