I have front disc brakes on my 67 coronet 500....is that factory? how do i tell?

[Hibbing_Coronet_500]

Google "AllPar" Disc-o-tech
A great write up on mopar disc brakes. Pictures and part numbers. Might help you identify your set up.

[theman440]

and what master would you recommend? power? manual? etc....

I have a suggestion for you - get a master cylinder for a 74 Dodge Dart w manual disc brakes. I use one on my racecar and it works great.

[ws27]

I have a suggestion for you - get a master cylinder for a 74 Dodge Dart w manual disc brakes. I use one on my racecar and it works great.

X2

[theman440]

I have a suggestion for you - get a master cylinder for a 74 Dodge Dart w manual disc brakes. I use one on my racecar and it works great.

Also - it is a direct bolt on.

[uncledon]

awesome....
great info.

[Racer Brown]

Maybe 68-74 Dart??

[uncledon]

ok new question as I am working on my breaks....
where is best place to buy brake lines? pre bent...and parts.
I found that I had a leaking wheel cylinder(look like been leaking pretty long time) so I have all new shoes, cylinders on rear....but my brake lines are pretty rusty, pitted, and broke off during cylinder install...so I am replacing all lines and T from rear to front.....
where you guys go? there are some on ebay prebent but do not know quality of those....
thanks.

[67r/t4speeder]

I have had good luck with these guys
http://inlinetube.com/Preformed%20Lines/...atalog.htm