Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Calling all 1968 RT owners
#11
Perfect. Just what we were looking for. Thanks.
Reply Purge Spammer

#12
Hi Mike, what do you make that measurement to be?
Reply Purge Spammer

#13
Me or the other Mike?
I love Mopars so much I'm date coding the skid marks in my underwear.
Reply

#14
Either Mike! Side marker to stripe?
Reply Purge Spammer

#15
I taped my stripes on today using the photos. Picture #1 shows 3-3/4" (95cm) from the end of the drivers side quarter panel to the first stripe. Picture #2 shows where the measurement in picture #1 was taken. In picture #3 I used a measurement of 3-1/2" (89cm) to the inside of the second stripe. I didn't use picture #4. Picture #5 is basically the same as #3. I used the 3-1/2" (89cm) measurement in #3 because it is easier to see than the measurement to the first stripe. I first taped at the top of the quarter panel as shown in #1, then taped on the side of the fender as shown in #3. Then I repeated on the passenger side. After marking the center (lengthwise) of the middle stripe, it is aligned at both ends with the 2 side stripes. It looks good. Again thanks 67440dodge.
Reply Purge Spammer

#16
Glad to help Mike!
I love Mopars so much I'm date coding the skid marks in my underwear.
Reply

#17
Craig, first of all I'm sure you have already figured out that the measurements I converted were in mm and not cm. When I have the stripe taped on my car using the 3-1/2" measurement, the distance from the side marker light to the first stripe is 8 mm. Good luck!
Reply Purge Spammer

#18
Hi Mike, thanks for the measurements. Once I get mine done I'll post pics, hopefully a fortnight or two! If I'd taken those measurements as cm not mm I'd have stripes from front to back of my car! These forums are so helpful.
Reply Purge Spammer

#19
Once you post em I'll copy the thread to the archives so others can view it easy..
I love Mopars so much I'm date coding the skid marks in my underwear.
Reply



Possibly Related Threads…
Thread Author Replies Views Last Post
  Trying to locate a 1968 Dodge Coronet R/T for a friend. ladygrhd 1 8 05-22-25, 11:35 AM
Last Post: 67440Dodge
  Trying to find my grandpas 1968 coronet rt. mason 4 34 01-29-24, 11:11 AM
Last Post: 67440Dodge
  1968 Coronet value jhutch33 17 4,959 07-20-21, 12:50 AM
Last Post: stonehengeheels
  Got to talk to original owners son tonight! 67RTBlue 7 5,335 10-19-16, 12:47 PM
Last Post: Racer Brown
  1968 Coronet vin #'s, what's the earliest known or registered ? moparjohnny 16 9,771 07-11-16, 02:21 AM
Last Post: packman555
  There is a good Facebook group for Coronet owners here.. TekHousE 1 2,731 07-25-14, 01:31 PM
Last Post: Piper
  55 Coronet Owners-Data book now on HH 69Coronetrt 0 2,010 07-08-14, 12:25 AM
Last Post: 69Coronetrt
  Pictures from Safford Chrysler Dodge Chrysler Product Owners Club show in Springfield, Virginia Jim 68cuda 10 7,111 05-06-14, 09:38 AM
Last Post: FRATZOG
  My 1968 Dodge Coronet project. revel68 9 10,552 01-05-14, 07:04 PM
Last Post: revel68
  ATTN: 69 coronet owners need photos ..... jfreakofkorn 1 2,726 07-15-13, 01:23 PM
Last Post: Warhawkfight34

Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2025 Melroy van den Berg.