Posts: 38
Threads: 6
Joined: Oct 2016
Hi everyone. I was hoping to get some direction with my inop back up lights. When I put it in reverse they flash but that's it. Is there a switch with an adjustment in the shifter mechanism or do you think it's just a bum n/s switch?
Posts: 529
Threads: 79
Joined: Sep 2014
From memory when I put ours together the switch mounted on the shifter under the console is adjustable. A sloppy shifter linkage will make this tricky. I adjusted ours to the center of the "slop". Put the car in reverse and have someone watch the lamps as you adjust it. Might try cleaning the switch with electronics spray cleaner too.
Posts: 38
Threads: 6
Joined: Oct 2016
Posts: 38
Threads: 6
Joined: Oct 2016
That did the trick, thanks!
Posts: 529
Threads: 79
Joined: Sep 2014