08-28-14, 12:19 PM
I think NEXT year after I get her running right I am going to swap out the Cam, lifters, rockers and springs. Any recommendations. NEED more HP!
|
Want to change out my cam to a hydraulic roller set. Any recommendations?
|
08-28-14, 04:46 PM
I'm putting this in my 383 over winter.
http://www.hughesengines.com/Index/produ...rtid=26420 BB HYD ROLLER WHIPLASH CAM [TABLE] [TR] [TD="colspan: 2"]Camshaft Technical Details[/TD] [/TR] [TR] [TD="class: smallBlackLabel"]Intake Valve Lift 1.5 Exhaust Valve Lift 1.5[/TD] [TD="class: smallBlackText, align: right"].510" .521"[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: smallBlackLabel"]Intake Valve Lift 1.6 Exhaust Valve Lift 1.6[/TD] [TD="class: smallBlackText, align: right"].544" .555"[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: smallBlackLabel"]Intake Duration at .050" Exhaust Duration at .050"[/TD] [TD="class: smallBlackText, align: right"]228° 236°[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: smallBlackLabel"]Lobe Separation Angle[/TD] [TD="class: smallBlackText, align: right"]107º[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: smallBlackLabel"]Intake Opening at .050" Exhaust Opening at .050"[/TD] [TD="class: smallBlackText, align: right"]12° BTC 50° BBC[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [TR] [TD="class: smallBlackLabel"]Intake Closing at .050" Exhaust Closing at .050"[/TD] [TD="class: smallBlackText, align: right"]36° ABC 6° ATC[/TD] [/TR] [TR] [TD="colspan: 2"][/TD] [/TR] [/TABLE]
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
09-06-14, 08:28 PM
TekHousE Wrote:I'm putting this in my 383 over winter. I would never buy anything from Hughes, especially camshafts. They have a terrible customer service reputation especially for camshafts. A couple of my friends bought their cams, had problems and Hughes told them to pound sand. One of them turns bloody red mad whenever he even hears the word Hughes! My understanding (according to my engine builder) is that Crane makes the only reliable hydraulic roller lifter for a BBM. I am considering a hyd roller for my daughter's car. Where are you located in Finland? I am planning a trip to Helsinki and Lappeenranta in October. I Also get to Imatra occasionally.
67 Coronet 500 - 9.610 @ 139.20 mph
Owned Since 1981 Daughter's Car 67 Coronet 500 Street Car with AC 13.300 @ 101.75 mph 69 GTX clone - build in progress........ 
09-07-14, 03:38 PM
I like Lunnaiti, (didn't spell it right, did I??)
Objects quickly DISAPPEAR in the rearview mirror and PLEASE stay seated until the ride comes to a complete stop!!
09-07-14, 09:08 PM
Nope. Lunati
67 Coronet 500 - 9.610 @ 139.20 mph
Owned Since 1981 Daughter's Car 67 Coronet 500 Street Car with AC 13.300 @ 101.75 mph 69 GTX clone - build in progress........
09-10-14, 06:22 PM
markz Wrote:I would never buy anything from Hughes, especially camshafts. They have a terrible customer service reputation especially for camshafts. A couple of my friends bought their cams, had problems and Hughes told them to pound sand. One of them turns bloody red mad whenever he even hears the word Hughes! I have had nothing but good service from Hughes..And a few other Mopar guys here in Finland have as well..go figure. I'm in Tampere, PM me contact details, and I will do the same, would be crazy for you to come here and not catch up! 
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Made a small change I didn't think I would ever do but it looks awesome. | Warhawkfight34 | 8 | 5,197 |
10-06-15, 10:57 PM Last Post: 1969 Hemi RTs |
|
| Time to change the carbs | Warhawkfight34 | 10 | 5,053 |
08-27-14, 07:20 PM Last Post: Warhawkfight34 |
|
| You know it's time to change your shifter when... | ws27 | 8 | 4,853 |
07-08-14, 01:30 AM Last Post: thebankerstoy |
|
| Users browsing this thread: |
| 1 Guest(s) |