I think NEXT year after I get her running right I am going to swap out the Cam, lifters, rockers and springs. Any recommendations. NEED more HP!
I'm putting this in my 383 over winter.
http://www.hughesengines.com/Index/produ...rtid=26420
BB HYD ROLLER WHIPLASH CAM
[TABLE]
[TR]
[TD="colspan: 2"]Camshaft Technical Details[/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Valve Lift 1.5
Exhaust Valve Lift 1.5[/TD]
[TD="class: smallBlackText, align: right"].510"
.521"[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Valve Lift 1.6
Exhaust Valve Lift 1.6[/TD]
[TD="class: smallBlackText, align: right"].544"
.555"[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Duration at .050"
Exhaust Duration at .050"[/TD]
[TD="class: smallBlackText, align: right"]228°
236°[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Lobe Separation Angle[/TD]
[TD="class: smallBlackText, align: right"]107º[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Opening at .050"
Exhaust Opening at .050"[/TD]
[TD="class: smallBlackText, align: right"]12° BTC
50° BBC[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Closing at .050"
Exhaust Closing at .050"[/TD]
[TD="class: smallBlackText, align: right"]36° ABC
6° ATC[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[/TABLE]
TekHousE Wrote:I'm putting this in my 383 over winter.
http://www.hughesengines.com/Index/produ...rtid=26420
BB HYD ROLLER WHIPLASH CAM
[TABLE]
[TR]
[TD="colspan: 2"]Camshaft Technical Details[/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Valve Lift 1.5
Exhaust Valve Lift 1.5[/TD]
[TD="class: smallBlackText, align: right"].510"
.521"[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Valve Lift 1.6
Exhaust Valve Lift 1.6[/TD]
[TD="class: smallBlackText, align: right"].544"
.555"[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Duration at .050"
Exhaust Duration at .050"[/TD]
[TD="class: smallBlackText, align: right"]228°
236°[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Lobe Separation Angle[/TD]
[TD="class: smallBlackText, align: right"]107º[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Opening at .050"
Exhaust Opening at .050"[/TD]
[TD="class: smallBlackText, align: right"]12° BTC
50° BBC[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TD="class: smallBlackLabel"]Intake Closing at .050"
Exhaust Closing at .050"[/TD]
[TD="class: smallBlackText, align: right"]36° ABC
6° ATC[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[/TABLE]
I would never buy anything from Hughes, especially camshafts. They have a terrible customer service reputation especially for camshafts. A couple of my friends bought their cams, had problems and Hughes told them to pound sand. One of them turns bloody red mad whenever he even hears the word Hughes!
My understanding (according to my engine builder) is that Crane makes the only reliable hydraulic roller lifter for a BBM. I am considering a hyd roller for my daughter's car.
Where are you located in Finland? I am planning a trip to Helsinki and Lappeenranta in October. I Also get to Imatra occasionally.
I like Lunnaiti, (didn't spell it right, did I??)
markz Wrote:I would never buy anything from Hughes, especially camshafts. They have a terrible customer service reputation especially for camshafts. A couple of my friends bought their cams, had problems and Hughes told them to pound sand. One of them turns bloody red mad whenever he even hears the word Hughes!
My understanding (according to my engine builder) is that Crane makes the only reliable hydraulic roller lifter for a BBM. I am considering a hyd roller for my daughter's car.
Where are you located in Finland? I am planning a trip to Helsinki and Lappeenranta in October. I Also get to Imatra occasionally.
I have had nothing but good service from Hughes..And a few other Mopar guys here in Finland have as well..go figure.
I'm in Tampere, PM me contact details, and I will do the same, would be crazy for you to come here and not catch up!
