Posts: 933
Threads: 151
Joined: Jul 2000
ws27 Wrote:
drunk LOL have some more cool aid.
You just undid 2 hours of pumping up my motivation! lol
crud...now I do need a
Beer!Beer!Beer!Beer!Beer!
Posts: 4,336
Threads: 91
Joined: Jan 2013
Hope you realize I'm actually kidding. LOL
President, New England chapter of Coronetaholics anonomous.
First thing to cvheck is the bulk head connector. Second things is check for a parasitic draw. Third check grounds under dash. Amp Meter is notorius time bomb.
Posts: 116
Threads: 19
Joined: Jan 2013
Piper Wrote:Challenge; Accepted.
LOL I know that feeling- and I concur, a Beer would put a
on your face!
Posts: 933
Threads: 151
Joined: Jul 2000
I ripped all the wiring out...going with an M&H harness from Year One so basically starting fresh
Posts: 3,134
Threads: 208
Joined: Jan 2013
Piper Wrote:I ripped all the wiring out...going with an M&H harness from Year One so basically starting fresh
A good choice Kevin, but just make sure that you get
ALL of the wiring harnesses you need to do the complete car, especially regarding the dash harness, as there are several sub wiring harnesses that plug into the main harness and those smaller sub harnesses are almost never included with the main harness. You can also order a custom engine harness that will allow you to run an aftermarket electronic ignition set-up, so there are several things to figure out before you place the order.
Richard
For some unknown reason, nobody seems to take me seriously............
Posts: 39
Threads: 6
Joined: Mar 2013
guys i also have a question has any of you installed the painless wire kit that they sell on jegs.com for our coronets it cost like 500 bucks sometimes i think i may want that because u know its def going to work any of u guys ever installed one?
Posts: 2,449
Threads: 143
Joined: Jan 2013
Manny951 Wrote:guys i also have a question has any of you installed the painless wire kit that they sell on jegs.com for our coronets it cost like 500 bucks sometimes i think i may want that because u know its def going to work any of u guys ever installed one?
I can't remember who, but I think someone here did!
Objects quickly DISAPPEAR in the rearview mirror and PLEASE stay seated until the ride comes to a complete stop!!
Posts: 447
Threads: 58
Joined: Jan 2013
I did a extensive re-wire on my 67 this past winter. I made my own harness. Being my car is not a 100 point show car!
I wanted the safety and security of modern voltage regulator, altenator, and ignition.
Without a schematic it's hard to figure out what's what!
I found working on one circuit at a time. Test. And move to the next.
Patents is key!
Posts: 19
Threads: 3
Joined: Jan 2013
Bad ammeter? Those things are known to, well, catch fire and melt?
1966 Dodge Coronet, yes, its a poly
1998 Grand Prix GTP (I-10 in Houston got that one)
1973 El Camino Ss (sold to an irresponsible IL unibody owner)
1987 Cougar XR-7 20th ed (I was in high school, need I say more)beat dead horse
