inner axle seals

[Avenger]

On an 8 3/4 what is the best wya to get the old seals out and get new ones in.i am finally able to fix it and am excited ahah

[4264door]

Your local auto parts store should have available a seal removal tool for your application. The right tool makes the job easy and problem free.

[Avenger]

what about putting them in?

[ws27]

You should be able to easily pry the old seal out with a cats paw or something similar. Just be carful not to scratch the bore. to get the new ones in, just use the correct size 1/2 drive socket with an extension and it'll go right in. If you're as nuts as me, put a very thin amount of silicone on the outside of the seal and in the bore where the seal will end up.

Good luck.

[67r/t4speeder]

Put grease on the lip spring of the new seal helps keep it from popping off while installing

[R/T XTC]

All great ideas you guys rock