Over the last 4 years I have been itching to buy a set of Torque Thrust D 105 series wheels. I have seen them from $157 to $181 a wheel depending on what site your on.
I was surfing Ebay the other day and you can buy them as cheap as $80 bucks a wheel. That`s about half off regular price. I did some research, its hard to tell if they are junk from china?
The price makes me want to buy them. But I don`t want cheap crap.
I bet they are most made in China if new ones. I have order sets for customers and never had a problem but do let them know where they are from, mostly from summit with tires. If eBay look for McCormack racing they are good people and always answer the phone.
I hunted many years for a matched set of original Ds and finally found them. I just like the way they look over new ones.
04-02-17, 12:23 PM (This post was last modified: 04-02-17, 12:29 PM by badmopar67.)
67RTBlue
nice ride! not sure if it's just the picture but it looks like you have 66 500 upper door molding on the car I was thinking of putting a set on mine which I do have on the shelf if so could You post a pic of them in a better angle?
Yes. An addition my Dad put on. Pulled a set at a yard YEARS ago. Funny thing is our car had the rt door replaced and it was a 66 with the upper molding. They just left it! So we just drilled the lt door and qtrs to complete. A note on the clips. They are non existent shocking right? I used plastic Christmas trees. The head slid into the channel perfectly and the serrations fit the holes snugly! No chipping paint or rust! They don't hold the that tight to the body but when you can't get em you deal with it. Also had to secure them with a dab of butyl so they wouldn't slide.
10673]
The black plastic push pins that hold fender liners, bumper covers, under hood trim etc on late model cars. They come in assorted sizes. Look like a thumb tack with a serrated pin
67RTBlue Wrote:The black plastic push pins that hold fender liners, bumper covers, under hood trim etc on late model cars. They come in assorted sizes. Look like a thumb tack with a serrated pin
Gotcha! Thanks.
President, New England chapter of Coronetaholics anonomous.
