Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is this the correct molding clip for my '67 500?
#1
4321

I have one end of my body trim that I discovered has no clip at the end near the rear bumper on the passenger side. It seems to be attached with some super strong double sided tape. I have not worked up the courage to pull the trim off, fearing that more clips might be missing. But the one above is the only one that I can find that seems to be for body moldings on a 67 Coronet. Since they are over 5 US a piece, not including shipping to me in Finland, I thought I would ask first.


Attached Files Thumbnail(s)
   
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
Reply Purge Spammer

#2
That does look correct Tek, check out your other post on FBBO. Be careful taking the trim off, some clips are screwed on from the back, others slide on nail head like pins, and still others use a plastic rivet that you have to push out the center from the inside. Take your time.
President, New England chapter of Coronetaholics anonomous.
Reply Purge Spammer

#3
Thanks mate. Do you have any idea how many I need? I kind of don't want to take them off during the 'high' season of car shows here, but would like to purchase them so I can change them in September. From past experience if I order now, it will still take 4 or so weeks to get to me! Incredible I know!
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
Reply Purge Spammer

#4
If you order from RT Specialties, they will be able to tell you how many are needed.
Reply Purge Spammer

#5
Good call..
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
Reply Purge Spammer

#6
Ya know.. Carlisle is only a short plane flight over the pond..

it'll cut that 4 week wait into just minutes Smile
I love Mopars so much I'm date coding the skid marks in my underwear.
Reply

#7
I only wish. This might sound dumb but attending that show is a dream I have.
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
Reply Purge Spammer

#8
TekHousE Wrote:I only wish. This might sound dumb but attending that show is a dream I have.

It's not that far fetched, I met a guy from Finland a couple of years ago. He was eye balling my red car because he was just starting a resto on his gtx. We had a great conversation.
President, New England chapter of Coronetaholics anonomous.
Reply Purge Spammer

#9
Well I go to the US all the time, except it's either for business or never at the time any car shows are on..For the record, I'm an Aussie, I just live in Finland.
[SIGPIC][/SIGPIC]My Flickr gallery for my '67http://www.flickr.com/photos/19913797@N0...666472876/
Reply Purge Spammer

#10
TekHousE Wrote:Well I go to the US all the time, except it's either for business or never at the time any car shows are on..For the record, I'm an Aussie, I just live in Finland.
Then after you're done with buisness, you take a 2 week vacation!!
Objects quickly DISAPPEAR in the rearview mirror and PLEASE stay seated until the ride comes to a complete stop!!
Reply Purge Spammer



Possibly Related Threads…
Thread Author Replies Views Last Post
  Correct Jack instruction decal to Coronet 66.. MrCoronet 42 15,193 04-11-16, 02:08 PM
Last Post: 67r/t4speeder
  Is this a correct wiper motor for my 67 coronet? TekHousE 1 3,577 08-27-15, 11:37 AM
Last Post: TekHousE

Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 Melroy van den Berg.