+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Where The Fun Happens (https://dodgecoronet.com/forum/forumdisplay.php?fid=3)
+--- Forum: General Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=12)
+--- Thread: Well Almost Ready to Go Down the Track! (/showthread.php?tid=4166)
Well Almost Ready to Go Down the Track! - markz - 08-10-23
Almost got the race car back together. You might remember that the brand new converter/tranny gave up the ghost in October which prevented me from running the new combo. Never found anything with the transmission or converter so I have my fingers crossed. Will know on Saturday - going to the Nats tomorrow.
Got the mufflers and new driveshaft loop done. That was a big job. Took about 25 hours to make and install the new driveshaft loop!
12568125691257012571
Well Almost Ready to Go Down the Track! - 67440Dodge - 08-10-23
I got same prob with my car.. where loop has to go is where my mufflers are... but I got much bigger ones..
Well Almost Ready to Go Down the Track! - markz - 08-10-23
67440Dodge Wrote:I got same prob with my car.. where loop has to go is where my mufflers are... but I got much bigger ones..
My mufflers cleared the old loop, but it was blocking the outlet. You can see it in the picture.
12572
Well Almost Ready to Go Down the Track! - 67440Dodge - 08-10-23
markz Wrote:My mufflers cleared the old loop, but it was blocking the outlet. You can see it in the picture.
Gotcha... mine has little more than 1" clearance between mufflers and driveshaft cause of the GV unit.
Wonder if tech would allow a bar welded across muff's to be considered a loop? (I know.. NOT)
Well Almost Ready to Go Down the Track! - markz - 08-10-23
67440Dodge Wrote:Gotcha... mine has little more than 1" clearance between mufflers and driveshaft cause of the GV unit.
Wonder if tech would allow a bar welded across muff's to be considered a loop? (I know.. NOT)
I didn't know you had a GV unit! Can you post pictures? I need to get the GTX done someday and it has one.
Well Almost Ready to Go Down the Track! - theman440 - 08-11-23
Mufflers? what are those?
Well Almost Ready to Go Down the Track! - theman440 - 08-11-23
Good luck Mark!
Well Almost Ready to Go Down the Track! - 67r/t4speeder - 08-12-23
Let us know how it goes Mark.
Well Almost Ready to Go Down the Track! - 67440Dodge - 08-14-23
markz Wrote:I didn't know you had a GV unit! Can you post pictures? I need to get the GTX done someday and it has one.
When I get back I'll post some... you running auto or stick?
Well Almost Ready to Go Down the Track! - markz - 08-15-23
67440Dodge Wrote:When I get back I'll post some... you running auto or stick?
Not running nothing! Damn 727 is still broke! :mad::mad::mad: