+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Where The Fun Happens (https://dodgecoronet.com/forum/forumdisplay.php?fid=3)
+--- Forum: General Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=12)
+--- Thread: 1967 Front End Work (/showthread.php?tid=4023)
1967 Front End Work - stonehengeheels - 07-20-21
I need to start work on the front end in stages. What would be the first step? Upper and Lower ball joints? Thanks.
1967 Front End Work - theman440 - 07-21-21
Id go lower ball joints, strut bushings and lower control arm bushings first. Then second upper ball joints and upper control arm bushings.
1967 Front End Work - 67r/t4speeder - 07-21-21
Have you had an inspection done?
Jeff is right start down low and work your way up. Only replace it if needed though.
1967 Front End Work - stonehengeheels - 07-21-21
No inspection, just wobble and tire scalloping. Just had a tire balance and same thing still happening. This very helpful. Thank you.
1967 Front End Work - 67440Dodge - 07-22-21
Just don't buy one of those all in one kits from Kanters/PST/Just Suspension.. cheaply made Chinese/Taiwanese parts that last as long as old fuel line and ethanol. Moog parts are still available, I've got a list of part numbers on the site to use.
If you're scalloping I'd look at shocks as well..
1967 Front End Work - stonehengeheels - 07-22-21
Where would I find that list 67440?
1967 Front End Work - Mopars & Missiles - 07-23-21
stonehengeheels Wrote:Where would I find that list 67440?
https://www.dodgecoronet.com/coronet/showthread.php?2162-Front-Suspension-Parts
1967 Front End Work - 67440Dodge - 07-24-21
Mopars & Missiles Wrote:https://www.dodgecoronet.com/coronet/showthread.php?2162-Front-Suspension-Parts
Thanks!! If your local auto parts store can't get them, believe it or not Amazon used to carry them.