+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Coronet Restoration/Paint Shop/Body Shop (https://dodgecoronet.com/forum/forumdisplay.php?fid=17)
+--- Thread: Progress on my 67 Coronet R/T (/showthread.php?tid=3296)
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
I've been restoring this car for several months now so I'll start from the beginning and try to get up to date with it. Here it is as I bought it.
8451]8452]8453]8454]8455]8456]8457]8458]8459]8460]8461]8462]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
I wondered why the back seat was so heavy when I took it out. Then it started moving. This guy was living in there!
8463]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Removed the windshield to find shiny factory paint
8464]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Rear floor is in pretty good shape. Just a few pinholes. Finally got it up to the garage to start the real work.
8465]8466]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Wire wheeling and rust encapsulator.
8467]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Getting everything down to bare metal and shooting an epoxy primer.
8468]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
No rust in the rockers. 8469]8470]
Progress on my 67 Coronet R/T - JimKueneman - 06-10-16
So did you see if the build sheet was in his stomach
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Drivers door is original and not too bad, but the lower front corner needed some work. Cut out the bad part of the skin and the flange where it wraps around was pretty much gone. Made a new flange and a patch for the skin. Came out pretty good.
8471]8472]8473]8474]8475]8476]8477]8478]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
JimKueneman Wrote:So did you see if the build sheet was in his stomach
He was pretty big. May have ended up there myself!