+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Tech Q&A (https://dodgecoronet.com/forum/forumdisplay.php?fid=16)
+--- Thread: Wheel stud Knurl size (/showthread.php?tid=3292)
Wheel stud Knurl size - Hibbing_Coronet_500 - 06-09-16
I ordered a Goodson wheel stud swedge cutter. I am going to go with longer wheel studs as I am running a 1/4 inch spacer on the front because the wheels have the wrong backspace.
My 67 has the 10" front drum. Anyone know the knurl diameter by chance?
After I get the 5 wheel studs changed out in the front. I will have a swedge cutter for sale.
Only 5?
The previous owner at sometime in history tried to remove the left handed thread wheel studs and ruined the hub.
So I only have 5 original wheel studs to remove.
Thanks in advance
Wheel stud Knurl size - 67r/t4speeder - 06-09-16
Usually it goes by stud size and that would be 1/2"
Wheel stud Knurl size - Hibbing_Coronet_500 - 06-09-16
Yeah, I have 1/2 x 20 studs