+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Tech Q&A (https://dodgecoronet.com/forum/forumdisplay.php?fid=16)
+--- Thread: inner axle seals (/showthread.php?tid=31)
inner axle seals - Avenger - 01-07-13
On an 8 3/4 what is the best wya to get the old seals out and get new ones in.i am finally able to fix it and am excited ahah
inner axle seals - 4264door - 01-07-13
Your local auto parts store should have available a seal removal tool for your application. The right tool makes the job easy and problem free.
inner axle seals - Avenger - 01-07-13
what about putting them in?
inner axle seals - ws27 - 01-08-13
You should be able to easily pry the old seal out with a cats paw or something similar. Just be carful not to scratch the bore. to get the new ones in, just use the correct size 1/2 drive socket with an extension and it'll go right in. If you're as nuts as me, put a very thin amount of silicone on the outside of the seal and in the bore where the seal will end up.
Good luck.
inner axle seals - 67r/t4speeder - 01-08-13
Put grease on the lip spring of the new seal helps keep it from popping off while installing
inner axle seals - R/T XTC - 01-08-13
All great ideas you guys rock