+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Coronet Restoration/Paint Shop/Body Shop (https://dodgecoronet.com/forum/forumdisplay.php?fid=17)
+--- Thread: Progress on my 67 Coronet R/T (/showthread.php?tid=3296)
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-18-16
This finally gets this post current! Here is the section I cut for a patch from the AMD panel.
8567]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-21-16
Welded the patch in tonight. Still needs a little touch up work, but almost done.
8572]8573]8574]
Progress on my 67 Coronet R/T - skeehorse - 06-23-16
Thanks for showing the progress looks like it is turning out great!
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-26-16
Made one more small patch and test fit the trunk floor. Looks like it will fit perfect.
8580]8581]8582]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-26-16
skeehorse Wrote:Thanks for showing the progress looks like it is turning out great!
Thanks! Lots of time and money! Also, a lot of sweat here lately. Every day has been over 90 degrees for a few weeks.
Progress on my 67 Coronet R/T - Racer Brown - 06-27-16
You're about 200 miles from me, if I ever need "some" welding, I'll give you a buzz, looks great!
Progress on my 67 Coronet R/T - 67RTBlue - 06-27-16
Looking good! And your doing it right too!
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-27-16
Racer Brown Wrote:You're about 200 miles from me, if I ever need "some" welding, I'll give you a buzz, looks great!
I've been using the same cheap Century 110 mig welder for probably 20 years. It was my dads so I used it to learn. When I moved out he gave it to me, along with a bunch of other tools. I'm not that great of a welder, but I can get it done. Not always pretty. Luckily, you grind body welds!
Progress on my 67 Coronet R/T - markz - 06-27-16
You do very nice work. Curious how far are you from me? Cincinnati.
You would be sick if I told you what I sold a great original pan, floor pan, inner and outer wheel wells and full quarters for. Did it to just get it out of my garage. Sold it about 3 years ago.
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-27-16
markz Wrote:You do very nice work. Curious how far are you from me? Cincinnati.
You would be sick if I told you what I sold a great original pan, floor pan, inner and outer wheel wells and full quarters for. Did it to just get it out of my garage. Sold it about 3 years ago.
I'm about 2 hours from Cincinnati. Good parts for these cars are hard to find! I'm used to Cudas and Challengers. You can buy every piece on them.