+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Coronet Restoration/Paint Shop/Body Shop (https://dodgecoronet.com/forum/forumdisplay.php?fid=17)
+--- Thread: Progress on my 67 Coronet R/T (/showthread.php?tid=3296)
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Undercoating was already falling off in a lot of places. Still pretty solid under it.
8479]8480]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Replaced the lower part of the trunk extension. The aftermarket part wasn't very good so I didn't want to use the whole thing.
8481]8482]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
New footwell floorpan.8483]8484]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
It was originally a floor shift automatic but I'm doing a 4 speed swap. Hump installed!
8485]8486]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Trunk floor coming out.
8487]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Rear bumper brace area was pretty rusty. Frame is excellent but the flanges on this side were gone. Had to make new ones.
8491]8492]8490]8489]8488]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Nobody makes this extension piece so had to make my own.
8493]8494]8495]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Repairing the rear bumper brace area. Had to make the left half.
8499]8496]8497]8498]
Progress on my 67 Coronet R/T - Callingdrlove01 - 06-10-16
Dropped the rear end. Still had the Sure-Grip tag.
8501]8502]
Progress on my 67 Coronet R/T - theman440 - 06-10-16
Wow, moving right along!