DodgeCoronet.com

Is a brass bushing and/or a hardened oil pump shaft needed when running a flat tappet cam


I forget if it should, or is that with the billet/rollers?...I was looking at my 440 and its looks like the stock stuff in there


(its running a .528 mech)

Hardened shaft only needed for roller..

Unless Dodge is differnt then Chevy, the only diff is you need a brass dist gear . BooBoo .

Opps , I,m sorry , You need the brass gear on the dist if its a roller cam . Sorry bout that . BooBoo

I thought the hardened pump shaft was only if you are running a high volume oil pump. Does the flat tappet cam do something to the oil pump shaft?

mostly likely not....i remember having to get both for the 4 speed..because there was "stuff" done to it