+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Where The Fun Happens (https://dodgecoronet.com/forum/forumdisplay.php?fid=3)
+--- Forum: General Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=12)
+--- Thread: What's it worth, not Coronet related (/showthread.php?tid=3867)
What's it worth, not Coronet related - Mark's 69 - 05-23-19
I'm looking at buying this 4 speed for my Dart project. It obviously needs an input shaft and bearing retainer. It comes with a bell housing with clutch fork, Z-bar, Z-bar ball stud and service kit, Mr. Gasket shifter with short straight shifter handle and all the shift linkage and a slightly used flywheel and clutch that need resurfaced for surface rust.
Opinions?
Bearing retainer is broken but I can't upload the picture.
What's it worth, not Coronet related - Mark's 69 - 05-24-19
This is the bearing retainer and shifter. I thought $1,000 for a good trans with the correct Hurst shifter was fair but I'm hesitant to offer 700 for this.
What's it worth, not Coronet related - 67440Dodge - 05-25-19
700 is a little steep I think. Bearing retainer alone runs close to $100. Synchro's don't look too hot either, so you'd be looking at a rebuild also.
What's it worth, not Coronet related - markz - 05-25-19
67440Dodge Wrote:700 is a little steep I think. Bearing retainer alone runs close to $100. Synchro's don't look too hot either, so you'd be looking at a rebuild also.
I agree. I wouldn't want to pay more than $400 for it.
What's it worth, not Coronet related - Mark's 69 - 05-26-19
Thanks guys. Amy told me I have to stop buying cheap stuff because I always end up spending more to make it right. I'll see what's available at Carlisle but with the car being far from finished I just may go with a kit from Passon or Brewers next year.
What's it worth, not Coronet related - 67r/t4speeder - 05-28-19
"Amy told me I have to stop buying cheap stuff because I always end up spending more to make it right" I hear this allot from Lauri too, and there right on.
IF you order from Passon make sure he has everything you need there in stock before placing the order....my 2 cents.
What's it worth, not Coronet related - Mark's 69 - 05-30-19
So I went to return the transmission and the guy said he's tired of it lying around and if I wanted everything for a hundred bucks I could have it. Otherwise he was going to scrap it. Needless to say I broight it home along with a somewhat rusty flywheel, clutch, pressure plate and spare pedal assembly. He threw in a brand new Z bar too. I have parts now anyway.
What's it worth, not Coronet related - 67440Dodge - 05-30-19
Now there's the deal of the century!
What's it worth, not Coronet related - 65rbdodge - 05-31-19
67440Dodge Wrote:Now there's the deal of the century!X2
What's it worth, not Coronet related - ws27 - 06-01-19
That's awesome.