+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: DIY Tech Forum (https://dodgecoronet.com/forum/forumdisplay.php?fid=18)
+--- Thread: Made a fan shroud (/showthread.php?tid=3798)
Made a fan shroud - Mark's 69 - 08-21-18
I got the idea from one of those Power Block show a while back when they made an air dam for an autocross truck. I made up a jig from some scrap wood, built the frame, and stretched a $2.50 fleece throw over it. This was my third attempt so I learned the jig and sewing the fleece in place worked best for me. Then I laid the fiberglass resin to it. Some sanding , a little bit of bondo to smooth it out , more sanding and a coat of paint and it's done.
I never really had overheating problems until they opened up the local airport for drag racing, then it got hot in the staging lanes. The radiator is a Summit universal fit so I was having trouble finding a shroud that I liked.
Made a fan shroud - 67r/t4speeder - 08-21-18
Really looks nice Mark
Made a fan shroud - Mark's 69 - 08-21-18
Thanks Andy
Made a fan shroud - 67RTBlue - 08-21-18
Wow that’s cool as hell! Never would’ve imagined doing it like that. I love making stuff especially when it works!
Made a fan shroud - Mark's 69 - 08-22-18
Thank you. Sometimes you just have to make it more than once to make it work though.
Made a fan shroud - 65rbdodge - 08-22-18
Very cool! Nice work
Made a fan shroud - ws27 - 08-22-18
That's awesome Mark.
Made a fan shroud - markz - 08-22-18
Very nice. I fabbed one out o aluminum once. Not fun. I like your method much better.
Made a fan shroud - Mark's 69 - 08-23-18
Thanks guys