![]() |
Turn Signal Wiring - Printable Version +- DodgeCoronet.com (https://dodgecoronet.com/forum) +-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4) +--- Forum: Tech Q&A (https://dodgecoronet.com/forum/forumdisplay.php?fid=16) +--- Thread: Turn Signal Wiring (/showthread.php?tid=3395) |
Turn Signal Wiring - markz - 09-03-16 On a 67, what is the correct front turn signal wiring route? Can someone please post a picture from underneath? Turn Signal Wiring - 67RTBlue - 09-03-16 You mean the pigtail going to the lamp in the bumper? Ours hung from the inner fender down to the bumper bracket area where there is a small clip holding the pigtail from the lamp to the bumper bracket. It seemed right. Car is at work and can't grab ya a pic. Turn Signal Wiring - 67RTBlue - 09-08-16 9074]9075] Here's a couple pics in case you are still wondering. Turn Signal Wiring - Racer Brown - 09-09-16 I stuck a 2nd one on the harness, just so it wouldn't hang down. Turn Signal Wiring - 67RTBlue - 09-09-16 Now that you mention it I have another set of front bumper brackets that I seem to recall having two clips attached to. Gotta check! Turn Signal Wiring - crlush - 10-12-16 Those are the cleanest bumper brackets I've ever seen! |