+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Coronet Restoration/Paint Shop/Body Shop (https://dodgecoronet.com/forum/forumdisplay.php?fid=17)
+--- Thread: Seat belt bolts-Washers for the bolts and which ones get them?? (/showthread.php?tid=3392)
Seat belt bolts-Washers for the bolts and which ones get them?? - 67RTBlue - 08-31-16
Installing the seat belts and wondering where the washers go. I only have 4. From the witness marks it looks like maybe they were on the back belts only? Is this correct?
Seat belt bolts-Washers for the bolts and which ones get them?? - 67-500 - 09-01-16
Just went out to the garage and checked mine; the interior's never been apart and there are no washers on the inboard or outboard front bucket seat belts. Don't know about the backs, I pulled the back seat out back in 1997 when I was searching for the build sheet(it was there!). Hope this helps.
Seat belt bolts-Washers for the bolts and which ones get them?? - 67RTBlue - 09-01-16
Thanks! That's the way I went with them. Looked right by the witness marks on them. Just seems strange there are none on the front.
Seat belt bolts-Washers for the bolts and which ones get them?? - ws27 - 09-03-16
I just pulled my rear seat after my GTX episode, checked for the washers and they were there. So this confirms they are correct.
Seat belt bolts-Washers for the bolts and which ones get them?? - 67RTBlue - 09-03-16
ws27 Wrote:I just pulled my rear seat after my GTX episode, checked for the washers and they were there. So this confirms they are correct.
Good deal. These little things are why it takes so long to do the simplest things.