+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Tech Q&A (https://dodgecoronet.com/forum/forumdisplay.php?fid=16)
+--- Thread: Bolt sizes (/showthread.php?tid=3289)
Bolt sizes - Piper - 06-06-16
What are the bolt sizes from intake manifold to head, and carbs to intake for a 440?
Bolt sizes - ws27 - 06-06-16
The intake to head are 3/8 coarse, and the carbs used studs that were 5/16 coarse on the intake side and 5/16 fine on the carb side, so you will also need 5/16 fine thread nuts.
Bolt sizes - Piper - 06-06-16
Thank you. we sell a bunch of this stuff at the branch makes it easy to just grab it off the shelf.