DodgeCoronet.com
Goals For 2016 - Printable Version

+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Generation Specific Models (https://dodgecoronet.com/forum/forumdisplay.php?fid=7)
+--- Forum: The Early Years (https://dodgecoronet.com/forum/forumdisplay.php?fid=27)
+--- Thread: Goals For 2016 (/showthread.php?tid=3135)

Pages: 1 2


Goals For 2016 - roadworthy - 02-20-16

So the '49 needs a brake upgrade, some wiring issues tightened up/finished, and the seat belts need to get installed. Also, since I ran out of gas tonight, I need to get a new fuel gauge sending unit. Wink

Oh, I guess I need to be a little more active here too. Sorry about that, guys.

I am eyeballing some sheet metal parts too!


Goals For 2016 - Racer Brown - 02-20-16

Yes, haven't heard from you in a while!


Goals For 2016 - 67r/t4speeder - 02-20-16

Nice to hear from you, keep updates coming.

We need more early cars guys on here.


Goals For 2016 - roadworthy - 02-22-16

Well, I just bought a NOS sending unit for the fuel gauge... that's one down!


Goals For 2016 - roadworthy - 03-02-16

I just scored a NOS right rear fender off ebay, now I gotta figure out how to get it from Pittsburgh to St. Louis on the cheap


Goals For 2016 - 67r/t4speeder - 03-03-16

Nice score, I shipped some big parts greyhound before no problem. Can the seller wrap it up good for you?


Goals For 2016 - theman440 - 03-03-16

Dang - you found NOS parts for a '49?


Goals For 2016 - roadworthy - 03-03-16

they are getting harder to come across but they're still out there


Goals For 2016 - roadworthy - 03-10-16

well, the ebay seller that I bought the fuel sending unit from can't seem to find it in any of their 3 warehouses... so they refunded my money yesterday and now I need to find another one to buy. disappointing


Goals For 2016 - wafo63 - 04-12-16

hello and don't know if you can help any but I just bought a 49 coronet, I have replace plugs, wires, cap, rotor, points, condenser, but once I get to about 45 mph it start to loose power and miss... didn't know if you had any suggestions or have ran into this.. thanks