Metal brake with a press - Printable Version +- DodgeCoronet.com (https://dodgecoronet.com/forum) +-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4) +--- Forum: DIY Tech Forum (https://dodgecoronet.com/forum/forumdisplay.php?fid=18) +--- Thread: Metal brake with a press (/showthread.php?tid=2944)

Metal brake with a press - 67r/t4speeder - 09-19-15 I needed some 3/16 X 3.5 wide steel to bend a 90 and do not have a brake for this so I tried using the press with some angle iron, I put the rod in middle because the angle iron was bending flat and it helped long enough to get the job done. It worked well I think7028]. Metal brake with a press - 67440Dodge - 09-19-15 Keep adding that heavy steel to Max.. Not like it's slow enough as it is now.... Metal brake with a press - 67r/t4speeder - 09-19-15 7029] I'm building a special trailer to haul OL Blue home after I win the race Metal brake with a press - thebankerstoy - 09-19-15 https://www.youtube.com/watch?v=I6eQ78HCGEA Richard Metal brake with a press - 67r/t4speeder - 09-19-15 Metal brake with a press - thebankerstoy - 09-19-15 Richard Metal brake with a press - 65rbdodge - 09-19-15 Nice work! If there's a will there's a way