+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Tech Q&A (https://dodgecoronet.com/forum/forumdisplay.php?fid=16)
+--- Thread: Rear axle bearing and retainer kits (/showthread.php?tid=235)
Rear axle bearing and retainer kits - 67r/t4speeder - 01-14-13
Just wanted to show the kit I got for a 8.75 axle I am building. Randy's ring & pinion AK-C8.75 . All Timken bearings
Rear axle bearing and retainer kits - ws27 - 01-14-13
Looks great Andy, how come there is only one outer seal.
Rear axle bearing and retainer kits - 67r/t4speeder - 01-14-13
Good question there Rich, it was a huge box of parts for two different vehicles and this kit box was open, I need to go digging and let you know. I notice the adjuster nut has different notches on it also so a modified locking tab might be need. I will report back on that also.
where's the cute little
guy when you need him
Rear axle bearing and retainer kits - 67r/t4speeder - 01-14-13
http://www.ringpinion.com/b2c/ProductDetails.aspx?ProdID=9474&Product=AK_C8.75-OEM-COMPLETE&Brand=Yukon_Gear_and_Axle
looks like I need to dig since they show two seals in kit
Rear axle bearing and retainer kits - ws27 - 01-14-13
Do you need to replace the retainers or can you reuse the old ones?
Rear axle bearing and retainer kits - 67r/t4speeder - 01-14-13
Old retainers are good so not sure why we got this complete kit
Rear axle bearing and retainer kits - 67r/t4speeder - 02-01-13
Showing difference in Randy's adjuster and OEM adjuster, both fit nice but Randy's you need to make new keeper since notches are bigger. Nice quality though.