DodgeCoronet.com
Oops, I've done it again... - Printable Version

+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Where The Fun Happens (https://dodgecoronet.com/forum/forumdisplay.php?fid=3)
+--- Forum: General Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=12)
+--- Thread: Oops, I've done it again... (/showthread.php?tid=3635)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14


Oops, I've done it again... - thebankerstoy - 08-22-17

By the way Rich, they are repoping the 1966 plastic two spoke steering wheels in several of the original factory colors if you want to go that route. Nobody is making the 1966 two spoke full horn ring, but I see nice ones for sale on Ebay all of the time, so no issues there.

Richard


Oops, I've done it again... - 67r/t4speeder - 08-22-17

It has some nice patina that I would leave be. I bet the Hemi with those 3.91 gears is allot of fun.

Nice car Rich


Oops, I've done it again... - ws27 - 08-22-17

67r/t4speeder Wrote:It has some nice patina that I would leave be. I bet the Hemi with those 3.91 gears is allot of fun.

Nice car Rich

You figured it out?


Oops, I've done it again... - ws27 - 08-22-17

Richard, I have to look through boxes the seller sent me. There may already be a steering wheel. If not, I'll go for a new one. The dash is going to be interesting.

I'm not liking the scoop because the paint on it is horrible, and they never cut a hole in the hood. So I might just pull if off and leave the little holes.

For now, I have a few other projects to finish. I'll try to share my engine job that has 1450 FT/LBS of torque when I have a moment!


Oops, I've done it again... - ws27 - 08-22-17

My problem with the gearing is that I'd hate to hurt such low mileage hemi by over revving it on a long highway trip. Most of my car shows are an hour away.

I agree, I should enjoy it a bit first.

Funny thing, a friend of mine told me to make sure I take him out before I change the gears! LOL


Oops, I've done it again... - theman440 - 08-22-17

. . . It's a Hemi car?


Oops, I've done it again... - theman440 - 08-22-17

What did it cost to ship it? I was in Honolulu in June Rich, how come you didn't have me check it out for you? Smile


Oops, I've done it again... - theman440 - 08-22-17

Here are a couple pics of the seat in Pinky's ride. No headrests or release button. The hinge covers are different too.


Oops, I've done it again... - ws27 - 08-22-17

Jeff, it is a real one. It was $3300.00 in total from Honolulu to Mass. I thought that wasn't too bad.

I didn't need anyone to check it out because I bought it from a friend that I could trust 100%. I had been talking to him about it from the moment he bought it for himself. He kind of lost storage for it recently, but also is buying a Demon so it became a double whammy for him. He also didn't want it to go to just anyone. So what does one do when they want a 66 or 67 Coronet to go to a good home, call Rich!Smile

Here are the pics I was keeping from you!


Oops, I've done it again... - ws27 - 08-22-17

Thank you Jeff, that is exactly what I'm looking for.