+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Modernize your Coronet (https://dodgecoronet.com/forum/forumdisplay.php?fid=21)
+--- Thread: Modern Hemi swap 66 Cornet 500 (/showthread.php?tid=3207)
Modern Hemi swap 66 Cornet 500 - thebankerstoy - 04-18-16
If I could print the 1966 Parts Book information here Mike, it would show a difference from the chart posted above.
In 1966, there were actually three different diameter shafts used on the B-Body cars including 2 3/4", 3" and 3 1/4" depending on the engine, gear ratio and rear differential assembly that the car was equipped with. If you have access to the 1966 parts book, take a look at section 16-02-1.
Richard
Modern Hemi swap 66 Cornet 500 - Tom66-500 - 04-18-16
That's a great idea Richard! I will definitely do that. Thanks for all the info, it's been really helpful!