DodgeCoronet.com
Power Steering Pump - Printable Version

+- DodgeCoronet.com (https://dodgecoronet.com/forum)
+-- Forum: Tech Discussion (https://dodgecoronet.com/forum/forumdisplay.php?fid=4)
+--- Forum: Tech Q&A (https://dodgecoronet.com/forum/forumdisplay.php?fid=16)
+--- Thread: Power Steering Pump (/showthread.php?tid=874)

Pages: 1 2 3


Power Steering Pump - Zaq - 04-30-13

If you go to the Tech Pages there is a log of info there. Most of it relating to putting B body parts on A Body cars but a lot of that can be useful to us B Bodyers.


Power Steering Pump - 67440Dodge - 04-30-13

The pump is buried in a box somewhere, the only one I found was one without the brackets. Here is a picture of the pump mounted on the engine so you can see how it mounts.

1553


Power Steering Pump - Zaq - 04-30-13

Great picture! Super helpful! I sent him another email and he found a federal pump with the bracket on it! Picking it up this week and slapping it on this weekend. Anyone happen to know the rough capacity for fluid?


Power Steering Pump - 67440Dodge - 04-30-13

4 pints of fluid according to the manual.

Don't use heater hose for the low pressure hose, the fluid will eat thru it. Any place that makes hoses should have the correct hose in stock.


Power Steering Pump - Zaq - 04-30-13

I can't thank you enough for the help! I forget I have the manual to look that stuff up. Should be set on the hose as the hoses were left on the steering box (the first good thing the guy before me did, he ripped ever other dang thing out of the car). Once I have that stuff on I should be in shape to get it running. I'll post some video of a big block with nothing but headers rattling my garage to pieces. Smile


Power Steering Pump - Zaq - 05-05-13

So I got a text from that guy on craigslist and he said he had found a federal with brackets.. cool, so I had my buddy meet him to pick them up for me. Tried putting it on today and discovered it was a TRW pump. The bracket mounted up right but the pulley was no where near lining up with the crankshaft pulley. At least a half inch beyond the second groove and the second groove is already being used for the water pump and alternator. Any ideas on why the TRW won't work?


Power Steering Pump - Zaq - 05-07-13

With all the birthday wishes I think my last post fell off the latest actions on the forum. Smile Bumping it so someone may be able to assist me with my TRW pump questions as I haven't had much luck searching other sites for TRW stuff.


Power Steering Pump - 67440Dodge - 05-07-13

Post a picture of it..


Power Steering Pump - Zaq - 05-09-13

165516561657


Power Steering Pump - Zaq - 05-09-13

The first shot is the TRW pump (obviously), the second shows that the water pump pulley alternator and crankshaft pulley line up on the crankshaft pulleys outer groove... and the final picture, if you look in the upper part of the picture you can see the power steering pulley is at least half an inch past the water pump pulley. Any thoughts or is it just that the TRW is not going to work.