08-16-23, 02:26 PM
1991 318 magnum removed from 91 Dakota 91,000 miles. I pulled a few main and rod caps and the bearings looked new as well as the cylinder walls, no ridge. Missing intake and water pump will need gasket set $150
1985 318 89,000 miles removed from Chrysler 5th ave. Hydraulic roller motor, 302 heads, again everything looked good inside, will need gasket set. Missing intake, I have a few 4bbl intake manifolds for extra $$ $150
1971 318 unknown mileage, looked good inside. Motor is clean and painted Chrysler blue. New 340 cam(.429/.444) timing chain, oil pump. #302 heads with comp #901 springs. Performer intake. Never fired with the new parts. Has car oil pan but I have a truck pan if you need that. I put this together as a spare for one of my cars, now I don’t need it. $500
Located in northeast PA about 20 minutes east of Scranton
1985 318 89,000 miles removed from Chrysler 5th ave. Hydraulic roller motor, 302 heads, again everything looked good inside, will need gasket set. Missing intake, I have a few 4bbl intake manifolds for extra $$ $150
1971 318 unknown mileage, looked good inside. Motor is clean and painted Chrysler blue. New 340 cam(.429/.444) timing chain, oil pump. #302 heads with comp #901 springs. Performer intake. Never fired with the new parts. Has car oil pan but I have a truck pan if you need that. I put this together as a spare for one of my cars, now I don’t need it. $500
Located in northeast PA about 20 minutes east of Scranton