DodgeCoronet.com

Full Version: Adjust the carburator ..on a 2v 318 Poly from 1966 (all original)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi Everybody!

Someone out there with a good description/pictures?

Think my 500 running a little rich..

Have a good weekend

Regards
Anders
I had to play with mine all the time yrs ago, first make sure the distriutor timing is correct, good new fuel, and use a vacuum gauge connected to the front of the 2 middle screws and slowly adjust back and forth till you get the most vacuum and the needle doesnt bounce around
Hi Dave!
Jepp, must check the timing...first
Thanks a lot for your answer

Regards
Anders