DodgeCoronet.com

Full Version: Exhaust Pipe Size
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
67-500 Wrote:It was around $700-$800 for a complete system including correct, original style mufflers with the dimpled ends. I was able to reuse all my original hangers and I purchased 2 1/4 " NOS clamps for the rear tailpipe hangers because the ones in the kit are slightly different. Tailpipes dump in the correct spot and are bent and cut just like original.6403]

BTW - That's a very nice car!
Looks like your guy did a real good job on those pipes; most guys would have just run them straight back and put a turn down on the end. And thanks. Big Grin
markz Wrote:BTW - That's a very nice car!

X2!
All these tailpipes look good, now they need to be "balogna" cut with a sawzaw or, maybe a jigsaw, CAREFULLY!
BALONEY!
ws27 Wrote:BALONEY!
I don't spelllll very well, do I?
Racer Brown Wrote:I don't spelllll very well, do I?

Just a play on words Steve.

Hope all is well.
Hey, I had to take English again in summer school to pass!!
Pages: 1 2