DodgeCoronet.com

One of our fellow DCR members Mike (mrconvertible) contacted me last week regarding information and part numbers for his 1967 Coronet 500 convertible and after providing that information to him, I thought that I'd post it here along with some additional diagrams and information for other members who own similar cars.

One of the questions that Mike asked me was if any of the 1967 Belvedere convertible models belt line trim that he needs would interchange on his Coronet, so all of the information listed below will include all of the 1967 Coronet and Belvedere convertible models.

I'll start off with all of the exterior view diagrams and part listings from the 1967 Factory Parts Book.

Richard

1967 Coronet 440 (W-H) Convertible Exterior Trim

[URL="http://s146.photobucket.com/user/thebankerstoy/media/1967%20Factory%20Parts%20Book%20Information/1967Coronetexteriorviewtrimpartsdiagram-Coronet440W-Hconvertible-page1.jpg.html"]

[/URL]
1967 Coronet 500 (W-P) Convertible Exterior Trim






1967 Coronet R/T (W-P) Convertible Exterior Trim

And the same information for the 1967 Belvedere models.

Richard

1967 Belvedere II (R-H) Convertible Exterior Trim





1967 Belvedere Satellite (R-P) Convertible Exterior Trim





1967 Belvedere GTX (R-P) Convertible Exterior Trim

Here is the information in detail for the 1967 Coronet and Belvedere convertible belt line trim parts that Mike asked about. (reformatted on 4-22-2014)

Richard

The *, **, *** ref # notes in the information that I did below is in reference to the specific Coronet or Belvedere model being referred to in the Factory Parts Book diagrams and corresponding parts listings in the top two posts above.

***********************************************1967 CORONET AND BELVEDERE CONVERTIBLE TRIM PARTS***********************************************


DODGE CORONET MODELS

Part number: 2784550 (* & ** ref # 13) (*** ref # 12)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding, quarter, outside belt, front, passenger side
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

Part number: 2784551 (* & ** ref # 13) (*** ref # 12)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding, quarter, outside belt, front, drivers side
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

PLYMOUTH BELVEDERE MODELS

Part number: 2586090 (* ref # 12) (** ref # 14) (*** ref # 13)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, front, passenger side
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

Part number – 2586091 (* ref # 12) (** ref # 14) (*** ref # 13)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding, quarter, outside belt, front, drivers side
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

DODGE CORONET MODELS

Part number: 2586096 (* & ** ref #14) (*** ref #13)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, passenger side
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

Part number: 2586097 (* & ** ref #14) (*** ref #13)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, drivers side
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

PLYMOUTH BELVEDERE MODELS

Part number: 2586096 (* ref #14) (** ref # 16) (*** ref # 15)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, passenger side
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

Part number: 2586097 (* ref #14) (** ref # 16) (*** ref # 15)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, drivers side
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

DODGE CORONET MODELS

Part number: 2586098 (* & **ref #15) (*** ref #14)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, corner, passenger side
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

Part number: 2586099 (* & **ref #15) (*** ref #14)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, corner, drivers side
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

PLYMOUTH BELVEDERE MODELS

Part number: 2586094 (* ref #15) (** ref # 17) (*** ref # 16)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, corner, passenger side
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

Part number: 2586095 (* ref #15) (** ref # 17) (*** ref # 16)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, rear, corner, drivers side
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

DODGE CORONET MODELS

Part number: 2586089 (* & **ref #16) (*** ref #15)
Section number: 23-23-31 (also in exterior view diagram)
Part description: moulding package, deck opening, upper panel
Part application: (*) 1967 Coronet 440 (W-H) convertible coupe
Part application: (**) 1967 Coronet 500 (W-P) convertible coupe
Part application: (***) 1967 Coronet R/T (W-P) convertible coupe

PLYMOUTH BELVEDERE MODELS

Part number: 2586089 (* ref #16) (** ref # 18) (*** ref # 17)
Section number: 23-23-31 (also in exterior view diagram)
Part description: moulding package, deck opening, upper panel
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

Part number: 2586092 (* ref #13) (** ref # 15) (*** ref # 14)
Section number: 23-23-39 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, intermediate
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

Part number: 2586093 (* ref #13) (** ref # 15) (*** ref # 14)
Section number: 23-23-31 (also in exterior view diagram)
Part description: moulding package, quarter, outside belt, intermediate
Part application: (*) 1967 Belvedere II (R-H) convertible coupe
Part application: (**) 1967 Belvedere Satellite (R-P) convertible coupe
Part application: (***) 1967 Belvedere GTX (R-P) convertible coupe

Below is the information that I provided to Mike as far as what convertible belt line moulding trim parts are interchangeable or not interchangeable between the 1967 Coronet and Belvedere models.

Richard


**************************1967 DODGE CORONET & PLYMOUTH BELVEDERE CONVERTIBLE TRIM PARTS INTERCHANGEABILITY*************************


Part number: 2784550
Part description: moulding, quarter, outside belt, front, passenger side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all Coronet convertible models only

Part number: 2784551
Part description: moulding, quarter, outside belt, front, drivers side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all Coronet convertible models only

Part number: 2586090
Part description: moulding package, quarter, outside belt, front, passenger side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Belvedere convertible models only

Part number: 2586091
Part description: moulding package, quarter, outside belt, front, drivers side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Belvedere convertible models only

Part number: 2586096
Part description: moulding package, quarter, outside belt, rear, passenger side
Does part interchange between all 1967 Coronet and Belvedere models? YES
Applications: all 1967 Coronet and Belvedere convertible models

Part number: 2586097
Part description: moulding package, quarter, outside belt, rear, drivers side
Does part interchange between all 1967 Coronet and Belvedere models? YES
Applications: all 1967 Coronet and Belvedere convertible models

Part number: 2586098
Part description: moulding package, quarter, outside belt, rear, corner, passenger side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Coronet convertible models only

Part number: 2586099
Part description: moulding package, quarter, outside belt, rear, corner, drivers side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Coronet convertible models only

Part number: 2586094
Part description: moulding package, quarter, outside belt, rear, corner, passenger side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Belvedere convertible models only

Part number: 2586095
Part description: moulding package, quarter, outside belt, rear, corner, drivers side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Belvedere convertible models only

Part number: 2586089
Part description: moulding package, deck opening, upper panel
Does part interchange between all 1967 Coronet and Belvedere models? YES
Applications: all 1967 Coronet and Belvedere convertible models

Part number: 2586092
Part description: moulding package, quarter, outside belt, intermediate, passenger side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Belvedere convertible models only

Part number: 2586093
Part description: moulding package, quarter, outside belt, intermediate,
drivers side
Does part interchange between all 1967 Coronet and Belvedere models? NO
Applications: all 1967 Belvedere convertible models only

I'd like to publicly thank you again for your help with this and to hemidon1 for the lead. One step closer to a complete car :-)

You're very welcome Mike and we will all look forward to hearing about the progress you're making on your very cool 67 Coronet 500 convertible!

Richard

WOW Richard, I think you pretty well covered it!!

Hello again Mike,

This morning I reformatted and fixed the one error in my original post, so this information should be a little easier for you to use now.

Richard

Awesome! The weather here is finally starting to allow for "garage work". I just need to finish the other "off brand" project first so I gave some work room.